Model Number: OP-300T-Optostar-a-#1446
Brand Name: OPTOSTAR
Key Specifications/Special Features:
Features:Core to core alignment by PAS technologyPAS: profile alignment systemFiber core can be display clearly
Single X or Y view and X or Y view simultaneously
Auto check quality of cleaved end face
9 seconds splice time and 30 seconds heat time
Small bulk and lightweight
5.7-inch TFT color LCD monitor with clear digital image display
USB and VGA interface
Software upgrade via USB interface
Specifications:
- Applicable fibers: SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653) and NZDS (ITU-T G.655)
- Fiber count: single
- Cladding diameters: 80 to 150m
- Coating diameters: 100 to 1000m
- Fiber cleaved length:
- 8 to 16mm with coating diameter of 250m or less
- 16mm with coating diameter of 250 to 1000m
- Optional set-plate for 8 to 16mm with coating diameter of 250 to 1000m is available
- Actual average splice loss:
- 0.02dB with SM, 0.01dB with mm
- 0.04dB with DS and 0.04dB with NZDS
- Measured by cut-back method relevant to ITU-T and IEC standards
- Splicing time: typical 9 seconds
- Return loss: >60dB
- Splicing mode: 53 (template), 40 (user)
- Splice loss estimate: available
- Storage of splice result: last 4000 results to be stored in Internal memory
- Fiber view and magnification:
- 300X magnification for single X or Y view, 150X magnification for X and Y view simultaneously, display direction can be changed
- Viewing method and display:
- Two CMOS cameras and 5.7-inch color LCD monitor
- Fiber core can be displayed clearly
- Operating conditions:
- 0 to 5000m above sea level
- 0 to 95% RH and -10-50°C, respectively
- Tension test: 2N
- Electrode life: 2500
- Tube heating modes: 9 (template) and 24 (user)
- Tube heating time: typical 30 seconds
- Applicable protection sleeve length: 60 and 40mm, series of micro sleeves
- No of splice/heating with battery: typical 150 cycles (splice/tube heat) with inner Li-battery
- Power supply: 100-240V AC with AC adapter, inner Li-battery (8000mAh)
- Terminals: USB 1.1 connector for PC communication, VGA connector for outer display
- Wind protection: maximum wind velocity of 15m/second
- Dimensions: (L) 150 x (W) 150 x (H) 150mm
- Weight: 2.7kg excluding battery and 3.2kg including battery
By certification [File Integrity]
